Batteries for special tasks

A wide range of sanitary fittings available in the offer of producers and distributors gives very large opportunities to those who are in need - whether during renovation and changing these elements of equipment for our bathrooms or kitchens or when arranging new rooms.

Often, however, there are situations that the products available in the standard offer, especially in the case of modifications, do not meet the requirements and expectations of customers. And what will you do then? There is nothing else but searching for unconventional solutions - that is, those that will be able to satisfy unusual needs.

Deante's offer meets such needs. It has been gradually extended for a long time with new models of bathroom and kitchen faucets, which can hardly be classified as classic and typical.

Let's first look at bathroom models, which definitely constitute a much wider range of offers, and looking at our bathrooms, especially those located in blocks, batteries must often meet not one and two functions at the same time - this is what our customers expect. To satisfy this need, we give the client a model of a basin mixer with a bidettet.

It fulfills two functions at the same time - firstly, a basin mixer standing on the washbasin (basic task), but also gives us the possibility to use the handset as a bidet element. Not having in the bathroom room too much space, where we could mount just a bidet equipped with a bidet mixer we can use a bidetta battery that will successfully replace it. We must, of course, meet the basic condition to be able to use this type of solution - i.e. the location of the toilet bowl must be in the vicinity of the sink, so that we can use the battery. The bidetta handset is small and does not take up much space. Thanks to this solution we have two in one.

Looking further at the sink in our bathroom, we can use it as a standing mixer with a pull-out telephone.

Thanks to it, in addition to the classic application, we can use the handset when needed - to facilitate the filling of larger dishes with water, washing and rinsing the wash basin itself - it makes it easier to keep it clean. In addition to the basin we have the option of mounting a standing mixer with so-called swivel spout.

Such an armature fitting makes it easier to use it and finds many supporters among users. The swivel spout resembles a spout used in a classic sink mixer, but it has been shorter since the basins usually have smaller compartments than sinks.

During major changes in our bathing salons, we often decide to change the washbasin into the currently fashionable wash basin.It also requires changing the battery that will be able to supply such a basin bowl with water. We must then use a battery with a raised body, which should also be mounted on the counter, and not on the wash basin itself.

Thanks to the high body, the battery has the right range and gives us the opportunity to pour water into the basin. Not only our home bathrooms require the use of unusual solutions. In places of public utility, such as gas stations or shopping centers, special types of batteries are installed, which here give the opportunity to save water. These are electronic, sensor, or temporary batteries, so that the time of water outflow is limited and water consumption is lower.

These batteries are activated by a motion sensor that opens the water flow and after a pre-programmed time it closes its outflow. Not only a device such as a bathroom sink sometimes requires the use of a special type of battery type. Another example is the bathtub. If you want to look for savings, not only space, but also money, you can use one battery for the bathtub and the sink at the same time. This is possible provided that they are in the immediate vicinity. Then we install a wall-mounted mixer with an extended spout that covers the two devices, and in addition to the spout we install a shower hose with a handset that will fulfill the basic function as in a standard bath faucet.

Many multi-hole bathtub batteries will appear in the offer of many manufacturers, but they require a bathtub with a suitable shelf or the preparation of such a shelf outside of it. However, we can compromise and have a battery installed on the bathtub, but it requires only one hole, so the bathtub does not have to be large.

When replacing non-standard bathroom faucets, it is worth mentioning thermostatic faucets. Here we have available all models, both basin, bidet, bathtub and shower. This solution is both economical and ecological, because we use less water thanks to the constant adjustment of the temperature at the 38 ° C standard. Batteries of this type are also safer to use, because they give a better chance of avoiding scalding hot water by mechanically blocking the flow of water warmer than 38oC.

But is only the bathroom a room where we have special requirements for the fittings? Of course not. The kitchen also sets special tasks for us. Many of us do not use tap water as drinking water. We use previously filters to prepare it for consumption.We use different types of equipment for this: jug filters, or mounted under the sink, which in turn require an additional valve.That's why we can find a solution in the battery offer that allows you to use both network and filtered water.

We have two aerators in one of the spouts, one for water from the network and the other for filtered water. There are two channels in the spout, which feed two types of water, one from the network, the other from the filter, and the switch gives you the opportunity to use the water of your choice. All the examples of battery models mentioned above were created as a result of reported user needs. It is us, who want to facilitate the everyday use of the bathroom and kitchen, we set requirements for the producers. Let's take care that they are as high as possible, because thanks to this we live easier, often cheaper, and in addition we care about reducing the amount of water used - the greatest asset we received from Nature.