Mirrors in the interior

Mirrors in the home should be used not only in the hall and bathroom. They can perform many more functions. Using the mirrors in the interior, we can, among others improve its visual reception - make, for example, that the room will seem larger than it really is.

Mirrors in the interior

Mirrors in the interior

Luther's interior will optically enlarge even the smallest space. They can also have a purely decorative function, replacing traditional paintings in this role. The mirrors light up the room, they will work very well with glass accessories.

Mirrors at home - a way to a small space

Mirrors are not only a practical addition, but also a useful tool for arranging small rooms. The mirrors used in such a interior will visually enlarge them. The way to a small space is to hang a mirror on a wall with a large surface area. Ideally, if it is opposite the windows, which give the room precious natural light. Such a positioned mirror brightens the interior very well and enhances the impression of space. If we can not hang a large vertical mirror, we can put on a horizontal model and place it, for example, above the commode. When there is not enough space on the wall, it is worth thinking about the mirror covering, for example, the wardrobe wings or the door in the room.

Mirrors in the interior as decorations

Mirrors can be an ornament in itself. To revive the interior, it is worth looking for interesting items or stock up on a modern model. There is a lot to choose from - the variety of shapes, sizes and frames is very large. We can obtain an interesting effect by creating mirrored galleries inside. When grouping mirrors on the wall, it is worth choosing models with different dimensions and stylish frames. It is important, however, that the mirrors are located at an approximate distance next to each other. If we do not have too much space on the wall, we can opt for self-adhesive mirrors. They can take very interesting shapes. An additional decorative effect will provide us with adequate mirror lighting. For this purpose, we can use, for example, traditional side wall sconces or a wall lamp for illumination of images placed next to the side edges, which is attached above the top edge of the mirror.

How to arrange a hall - functional furniture for the hallway

A hallway is the first and last zone of a house or apartment that we see when we enter or leave it. When planning the arrangement of this space in addition to functional aspects, it is worth thinking about the aesthetics of the hall.

The hall due to its utility function and usually a small area is often neglected. Wrongly, because this zone of the house is like an introduction, a preview of further interiors. When planning the arrangement of the hall, it is worth to put on furniture that combines functionality with aesthetics. Sometimes it is good to move away from the template solutions to those more effective and equally useful.

The hall is well-equipped - effective and functional furniture for the hallway

The choice of furniture for the hall will be decided mainly by the available space. However, we can successfully choose equipment that will not take up too much space in a fairly narrow space, will facilitate the use of the hallway and will look impressive. When planning the arrangement of the hall, let's think about the place on the bench. Let's put on a piece of furniture that will serve as a seat that facilitates putting on and taking off shoes, but it will also serve as a storage for items that we do not want to display in the hallway. A seat covered with attractive material or stylish quilted will bring a touch of elegance to this zone.

In the hall it is worthwhile to find a place also for a narrow table. Console tables with drawers work best here. Such a piece of furniture will prove useful for putting away keys, bags or correspondence. Under the table, we can set a pouf or stool that will be useful when putting on shoes, replacing the bench in this function.

Instead of a table in the hall, you can set a dresser - it will be well presented and will accommodate more items. Choosing the right model, remember to leave 90 cm free space next to the furniture for free passage. A good choice for the hallway will be a semi-circular shaped table or commode. The rounded front will make it easier for us to walk past the furniture placed under the wall.

Hallway in details

In a narrow hall with limited access to daylight, artificial lighting plays an important role. Instead of a classic ceiling in the entrance area, it is worth hanging up an impressive chandelier, reminiscent of hanging lamps used in other interiors. By placing a table lamp emitting warm light on the table or dresser in the hall, we will make the interior more cozy.

Wipers are a practical addition in every hall. Their aesthetics, however, do not always suit us. Instead of a doormat you can use a flat woven sidewalk. It is worth choosing one that we easily wash into the laundries. It is also good to protect it from slipping by placing a non-slip mat under it.

How to hang paintings on the wall - home gallery

The paintings on the wall make the interior take on a character, it really becomes ours. The arrangement of images depends onfrom individual preferences of the household members and interior style. How to create your own home gallery?

Hanging the picture on the wall

Hanging the picture on the wall

Lovers of harmony and order and classic interiors are recommended to arrange the pictures in an orderly manner. When planning the deployment of images in interiors with a looser style and character, we do not have to worry that they are all hung under the ruler.

Paintings on the wall in full harmony

The classic way of displaying paintings on the wall is hanging them in even rows and columns. This arrangement of images is clean, graphic and allows you to fully present your favorite graphics and photos. When hanging pictures on the wall in rows and columns it is worth taking the starting point. Let's analyze the location of the furniture standing next to the wall, let's mark the middle of the main furniture, eg a chest of drawers and lead the line up. This will be the line along which the images will be hung vertically. Images in rows are placed next to the image along the main line. In this way a harmonious composition will be created. Reflecting on how high to suspend the first rows of paintings, it is worth looking at the details in the interior and looking for horizontal references. You can hang the paintings, for example, at the height of the top edge of the fireplace console, shelf line in the rack or window frame.

Paintings on the wall in artistic disarray

The easiest and least-demanding way to hang pictures on the wall is to arrange them in a free grouping. Images in frames of various dimensions and style can be hung side by side quite accidentally - their edges will not run in a straight line. Such loose composition, although it does not look like it, can be meticulously thought out. For this purpose, it is worth spreading the images on the floor and arrange them in a way that will satisfy us visually. The composition should start with the largest image or the one with the most intense colors. It is placed in the center of the composition. He will place space on other paintings. Once the artwork is ready, you can start hanging images on the wall.

10 principles of good brick clinker bricklaying

1. Choose the right type of mortar for the brick The building materials market offers a large variety of facing bricks, which include: facing brick, clinker, silicate brick, hand-formed brick, etc. They are characterized by different properties, of which the behavior deserves particular attention bricks in terms of water absorption (absorbability). Due to this parameter, bricks can be divided into: bricks with very high absorbability, with normal absorbability, with low absorbability and very low absorbability.Therefore, the quick-mix company went a step further in its research, developing four types of VOR mortars taking into account the degree of water absorption of bricks. Thanks to the expanded assortment of VOR mortars, we can brick without risk all kinds of bricks, regardless of their type and type, purpose, weight or size.

1. Choose the right type of mortar for the brick

The building materials market offers us a wide variety of facing bricks, which include: facing brick, clinker, silicate brick, hand-shaped brick, etc. They are characterized by different properties, of which the brick behavior in water absorption (dehydration) deserves particular attention. Due to this parameter, bricks can be divided into: bricks with very high absorbability, with normal absorbability, with low absorbability and very low absorbability. Therefore, the quick-mix company went a step further in its research, developing four types of VOR mortars taking into account the degree of water absorption of bricks. Thanks to the expanded assortment of VOR mortars, we can brick without risk all kinds of bricks, regardless of their type and type, purpose, weight or size.

2. Protect the brick from which you will build up

Moistened bricks - rainwater or groundwater - increase the risk of efflorescence. Also the moisture contained in the bricks changes their absorption characteristics which may result in improper binding of the mortar. The bricks should be stored on pallets and should be protected against adverse weather conditions.

3. When preparing the mortar, follow the manufacturer's instructions

The amount of mixing water should be strictly adhered to. Subsequent adding of water to hardening mortar is not permitted.Observance of the machining time as well as the start of grouting determines the subsequent final effect of the masonry.

4. Do not add any additives or admixtures to the mortar unless this instruction is mentioned in the instructions for use.

The use of plasticizers, etc. additives may significantly degrade mortar binding properties or affect its color. Using them can change the characteristics of the mortar, which in subsequent actions may result, for example, discoloration, lack of strength, unwanted shrinkage of the mortar and crumbling and falling out.

5. Remember to do the right horizontal insulation - it will protect the raised element from rising moisture.

Regardless of whether we are building a house wall or placing fence posts, it is recommended to create a horizontal damp proofing that will protect the bricks against rising moisture from the ground.

6. Work in optimal weather conditions and temperature (from +5 o C to 25 o C). Stop work immediately if adverse weather conditions occur. Plan your work so that when setting the mortar, the temperature does not drop below +5 o C during the setting time

7. The ready joint should be flush with the brick surface.

The last stage of bricklaying works is making a weld - an element that affects the aesthetics and durability of the wall.

Bricklaying on the so-called slats - this method has many risks:

- at least 20% of the brick surface does not carry the load,

- the joint is not properly hardened,

- rainwater has access to the inner part of the brick,

- it is possible to damage the face of the bricks when removing the slats.

Correctly made joint does not crumble, it allows rainwater to run down the face of the wall, prevents snow and dirt - it guarantees long-term use of the wall without dirt and efflorescence.

8. Making a joint in one cycle with bricklaying

When laying and grouting in one cycle, remember that grout profiling should take place at the right moment - it will help you in this so-called "thumb test" - the water contained in the mortar should not soil the thumb.

When laying and grouting in separate cycles, remember to leave space for a joint with a depth of approx. 1.5 cm .

9. Properly compact the mortar in the corners

Corners as elements particularly exposed to the impact of adverse weather conditions and mechanical damage should be covered with special attention during execution works.

10 Protect your wall work properly

When finishing or interrupting work, secure the brick element against adverse weather conditions (precipitation or excessive sun exposure). Remember, however, that the protective material allows free ventilation of the wall. A common mistake is tight wrapping foil posts with foil - this disrupts the binding process - it prevents evaporation of the water contained in the mortar.

Bricklaying clinker brick is one of the most demanding building processes - the correct selection of mortars and the contractor's company guarantees a correct final result - high aesthetics of the constructed object. quick-mix - as the only one on the market - offers mortar for clinker bricklaying (also with original Rhine tubag) in 16 colors, with four different parameters of absorbability of bricks.

10 advantages, why try H + H cellular concrete

Bringing walls in the H + H system is building from a very good quality material, which is H + H cellular concrete. The H + H system provides a full range of products: blocks, tiles, lintels, fittings, ceilings and thin-layer mortars. Deciding to build in the H + H system, we reduce the cost of making the wall ready and shorten significantly the time of the investment compared to other building materials. In summary, working with H + H cellular concrete is pure pleasure. Cellular concrete is an environmentally friendly material because it is made from raw materials that occur in the natural environment. Its production consists mainly of: quartz sand, lime, cement, water and the agent causing the fluffiness of the prepared product. Here are 10 advantages of why it is worth building H + H aerated concrete.

Bringing walls in the H + H system is building from a very good quality material, which is H + H cellular concrete. The H + H system provides a full range of products: blocks, tiles, lintels, fittings, ceilings and thin-layer mortars. Deciding to build in the H + H system, we reduce the cost of making the wall ready and shorten significantly the time of the investment compared to other building materials. In summary, working with H + H cellular concrete is pure pleasure. Cellular concrete is an environmentally friendly material because it is made from raw materials that occur in the natural environment. Its production consists mainly of: quartz sand, lime, cement, water and the agent causing the fluffiness of the prepared product. Here are 10 advantages of why it is worth building H + H aerated concrete.

1. The hottest building material

It has been known for a long time that the best heat insulator is air. In the structure of aerated autoclaved concrete, air occupies 60-85% of the total volume, which is why buildings made of cellular concrete significantly reduce the need for heating or air conditioning in comparison to other masonry materials. H + H cellular concrete is characterized by extremely favorable thermal insulation; one of the best among construction materials used for erecting external partitions. Thanks to this property, it is an excellent material for building single-layer walls. The measure of thermal insulation is the thermal conductivity coefficient, which is dependent on the volume density, raw material composition and moisture of a given material. The exceptionally favorable (low) value of the thermal conductivity coefficient λ (W / mK) of H + H cellular concrete blocks allows to obtain walls with a low heat transfer coefficient U (W / m2K), enabling single-layer walls to be erected without the need for thermal insulation.

2. Lightweight with high compressive strength

One of the most valuable properties of aerated concrete is its low volume weight. Thanks to its lightness, it enables adaptation of existing places, eg attics and attics, in which excessive construction of structures created many years ago is not allowed. Not without significance is the fact that most of the masonry work is done by hand and the weight of the parts being moved plays a significant role. High compressive strength of aerated concrete allows elevation of up to 5 storeys without reinforcing the structure. The compression strength of 700 kg / m3 blocks is 7.5 MPa.

3. Non-flammable in the highest fire resistance class

Due to its purely mineral composition, cellular concrete is classified as a non-combustible building material in the highest fire resistance class A1. This means that during a fire it does not emit any harmful or poisonous substances for users. It is resistant to fire at temperatures up to 1200 ° C and, unlike other building materials, it is heat-resistant. Fire resistance of cellular concrete walls reaches 4 hours, meeting the highest requirements of Polish regulations in the field of fire protection. The walls of aerated concrete prevent the spread of fire, and thus protect life and property, and provide a peaceful evacuation of people in the event of fire hazards

4. Easy to process

Blocks and tiles made of aerated concrete using the simplest tools can be freely processed: cut and make holes of various size for electrical and plumbing installations. It is particularly easy to erect walls from elements connected to a tongue and groove with a mounting bracket. Blocks can be cut manually using a hand saw or band saw. It is easy to make installation grooves in the already-walled walls, which allows for quick work progress. A well-made wall of cellular concrete blocks is ready for plastering.

5. Good acoustic isolator

Walls made of aerated concrete have a greater ability to dampen sounds compared to other building materials of the same density. Thanks to this, the walls have good acoustic insulation and provide a quiet, comfortable apartment and some protection against intrusive sounds from both outside and inside the building

6. Durable and pleasant to use for many generations

Cellular concrete does not age. It is resistant to chemical and biological corrosion as well as to mold, bacteria and also acid rain in industrial regions. The chemical composition of aerated concrete blocks the formation of efflorescence and salivation, fungi and harmful micro-organisms. Cellular concrete retains its properties throughout the life of the building, and the walls made of it provide a pleasant microclimate interior and have a positive effect on the well-being of the household, creating the right conditions for both work and rest. Pores in the cellular concrete favor the absorption of excess moisture from the air inside the building and give it away when the air is too dry. Thanks to the appropriate thickness, single-layer walls accumulate and release heat depending on the temperature inside and outside the building, keeping it at a constant level. This process takes place both in the daily and annual cycle. In winter, it protects against a sudden cooling down and in the summer its excessive overheating.

7. Large heat capacity

In cellular aerated concrete rooms there are optimal thermal and humidity conditions, it is neither too dry nor too humid. Such a microclimate is the result of vapor permeability of cellular concrete. Cellular concrete absorbs the excess of air in the room, and releases it when the room is dry. The walls of H + H aerated concrete are characterized by high thermal inertia. The heat transfer process from one side of the wall to the other is, therefore, very slow, four times longer than in traditional insulation materials. This ensures high thermal comfort of the rooms: in the winter it is warm and in the summer cool

8. Energy saving

In single-family houses, the largest heat losses occur on external walls. In an extreme case, even 35% of heat from the whole house "escapes" through external walls. Therefore, the correct selection of elements for the construction of external walls is extremely important from the point of view of future operating costs of the building. The concept of an energy-efficient house is increasingly appealing to investors' awareness. Energy efficiency becomes a desirable feature of the building and an important criterion for good design and quality of workmanship. For a building user, this results in measurable benefits in the form of low heating costs. You should start thinking about energy saving your home already at the house design stage. The very shape of the building and its orientation towards the world's sides is of great importance for future energy efficiency. In order to heat buildings efficiently and cheaply, it is first of all necessary to limit heat losses through external barriers: roofs, walls and floors.Thanks to the use of H + H cellular concrete, the savings associated with heating the building are higher than with the use of other masonry materials.

9. Saving money

Why can we save money by choosing H + H cellular concrete? First of all, H + H cellular concrete is the material from which we build a house, saving money on labor the fastest. Secondly, by making one-layer varietal walls of 350 and 365 mm thick, we will save on the insulation of the building, because the bricked wall has a coefficient of U = 0.25 W / m2K. Thirdly, the smooth surface and minimal dimensional deviations ( 1.5 mm ) will allow the use of thinner plasters, which is impossible when using other building materials. Fourthly, when masonry (gluing) for thin-bed mortar, we will use less mortar, the consumption of which also affects the unit cost of 1 m2 of the wall. Therefore, it is very important not to be guided by the unit prices of materials, because they can be very confusing. Calculate the cost of making the wall ready

10. Time saving

When building a house, we want to enter it as soon as possible. However, building a house requires time. To limit the time of building a house, you need to use reliable and proven solutions. Building in the H + H system allows to minimize the time of bricking the house, because all elements are made of a homogeneous material and easy to process. Bricklaying time is also shorter because we use only 7 blocks per 1m2 of the wall, which is impossible in other technologies. The use of finished lintel beams results in shorter bricklaying time and the lack of technological breaks related to binding and hardening of concrete in traditional lintels. In addition, the very high dimensional accuracy of H + H blocks allows you to limit time during installation and finishing works

Black-black-black!

I just love black moto!

First video

First nice freak:

I like that.